1
0
linux/debian/patches/patchset-xanmod/valve/0001-extcon-Add-driver-for-Steam-Deck.patch

220 lines
6.4 KiB
Diff

From e914b6a0d571a92db04869a02e06dc83ec7c0700 Mon Sep 17 00:00:00 2001
From: Andrey Smirnov <andrew.smirnov@gmail.com>
Date: Sun, 27 Feb 2022 14:46:08 -0800
Subject: [PATCH 1/6] extcon: Add driver for Steam Deck
(cherry picked from commit f9f2eddae582ae39d5f89c1218448fc259b90aa8)
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Alexandre Frade <kernel@xanmod.org>
---
drivers/extcon/Kconfig | 7 ++
drivers/extcon/Makefile | 1 +
drivers/extcon/extcon-steamdeck.c | 180 ++++++++++++++++++++++++++++++
3 files changed, 188 insertions(+)
create mode 100644 drivers/extcon/extcon-steamdeck.c
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -214,4 +214,11 @@ config EXTCON_RTK_TYPE_C
The DHC (Digital Home Hub) RTD series SoC contains a type c module.
This driver will detect the status of the type-c port.
+config EXTCON_STEAMDECK
+ tristate "Steam Deck extcon support"
+ depends on MFD_STEAMDECK
+ help
+ Say Y here to enable support of USB Type C cable detection extcon
+ support on Steam Deck devices
+
endif
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-
obj-$(CONFIG_EXTCON_USBC_CROS_EC) += extcon-usbc-cros-ec.o
obj-$(CONFIG_EXTCON_USBC_TUSB320) += extcon-usbc-tusb320.o
obj-$(CONFIG_EXTCON_RTK_TYPE_C) += extcon-rtk-type-c.o
+obj-$(CONFIG_EXTCON_STEAMDECK) += extcon-steamdeck.o
--- /dev/null
+++ b/drivers/extcon/extcon-steamdeck.c
@@ -0,0 +1,180 @@
+
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+#include <linux/extcon-provider.h>
+
+#define ACPI_STEAMDECK_NOTIFY_STATUS 0x80
+
+/* 0 - port connected, 1 -port disconnected */
+#define ACPI_STEAMDECK_PORT_CONNECT BIT(0)
+/* 0 - Upstream Facing Port, 1 - Downdstream Facing Port */
+#define ACPI_STEAMDECK_CUR_DATA_ROLE BIT(3)
+/*
+ * Debouncing delay to allow negotiation process to settle. 2s value
+ * was arrived at via trial and error.
+ */
+#define STEAMDECK_ROLE_SWITCH_DELAY (msecs_to_jiffies(2000))
+
+struct steamdeck_extcon {
+ struct acpi_device *adev;
+ struct delayed_work role_work;
+ struct extcon_dev *edev;
+ struct device *dev;
+};
+
+static int steamdeck_read_pdcs(struct steamdeck_extcon *sd, unsigned long long *pdcs)
+{
+ acpi_status status;
+
+ status = acpi_evaluate_integer(sd->adev->handle, "PDCS", NULL, pdcs);
+ if (ACPI_FAILURE(status)) {
+ dev_err(sd->dev, "PDCS evaluation failed: %s\n",
+ acpi_format_exception(status));
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void steamdeck_usb_role_work(struct work_struct *work)
+{
+ struct steamdeck_extcon *sd =
+ container_of(work, struct steamdeck_extcon, role_work.work);
+ unsigned long long pdcs;
+ bool usb_host;
+
+ if (steamdeck_read_pdcs(sd, &pdcs))
+ return;
+
+ /*
+ * We only care about these two
+ */
+ pdcs &= ACPI_STEAMDECK_PORT_CONNECT | ACPI_STEAMDECK_CUR_DATA_ROLE;
+
+ /*
+ * For "connect" events our role is determined by a bit in
+ * PDCS, for "disconnect" we switch to being a gadget
+ * unconditionally. The thinking for the latter is we don't
+ * want to start acting as a USB host until we get
+ * confirmation from the firmware that we are a USB host
+ */
+ usb_host = (pdcs & ACPI_STEAMDECK_PORT_CONNECT) ?
+ pdcs & ACPI_STEAMDECK_CUR_DATA_ROLE : false;
+
+ dev_dbg(sd->dev, "USB role is %s\n", usb_host ? "host" : "device");
+ WARN_ON(extcon_set_state_sync(sd->edev, EXTCON_USB_HOST,
+ usb_host));
+
+}
+
+static void steamdeck_notify(acpi_handle handle, u32 event, void *context)
+{
+ struct device *dev = context;
+ struct steamdeck_extcon *sd = dev_get_drvdata(dev);
+ unsigned long long pdcs;
+ unsigned long delay;
+
+ switch (event) {
+ case ACPI_STEAMDECK_NOTIFY_STATUS:
+ if (steamdeck_read_pdcs(sd, &pdcs))
+ return;
+ /*
+ * We process "disconnect" events immediately and
+ * "connect" events with a delay to give the HW time
+ * to settle. For example attaching USB hub (at least
+ * for HW used for testing) will generate intermediary
+ * event with "host" bit not set, followed by the one
+ * that does have it set.
+ */
+ delay = (pdcs & ACPI_STEAMDECK_PORT_CONNECT) ?
+ STEAMDECK_ROLE_SWITCH_DELAY : 0;
+
+ queue_delayed_work(system_long_wq, &sd->role_work, delay);
+ break;
+ default:
+ dev_warn(dev, "Unsupported event [0x%x]\n", event);
+ }
+}
+
+static void steamdeck_remove_notify_handler(void *data)
+{
+ struct steamdeck_extcon *sd = data;
+
+ acpi_remove_notify_handler(sd->adev->handle, ACPI_DEVICE_NOTIFY,
+ steamdeck_notify);
+ cancel_delayed_work_sync(&sd->role_work);
+}
+
+static const unsigned int steamdeck_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_CHG_USB_SDP,
+ EXTCON_CHG_USB_CDP,
+ EXTCON_CHG_USB_DCP,
+ EXTCON_CHG_USB_ACA,
+ EXTCON_NONE,
+};
+
+static int steamdeck_extcon_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct steamdeck_extcon *sd;
+ acpi_status status;
+ int ret;
+
+ sd = devm_kzalloc(dev, sizeof(*sd), GFP_KERNEL);
+ if (!sd)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&sd->role_work, steamdeck_usb_role_work);
+ platform_set_drvdata(pdev, sd);
+ sd->adev = ACPI_COMPANION(dev->parent);
+ sd->dev = dev;
+ sd->edev = devm_extcon_dev_allocate(dev, steamdeck_extcon_cable);
+ if (IS_ERR(sd->edev))
+ return PTR_ERR(sd->edev);
+
+ ret = devm_extcon_dev_register(dev, sd->edev);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register extcon device: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Set initial role value
+ */
+ queue_delayed_work(system_long_wq, &sd->role_work, 0);
+ flush_delayed_work(&sd->role_work);
+
+ status = acpi_install_notify_handler(sd->adev->handle,
+ ACPI_DEVICE_NOTIFY,
+ steamdeck_notify,
+ dev);
+ if (ACPI_FAILURE(status)) {
+ dev_err(dev, "Error installing ACPI notify handler\n");
+ return -EIO;
+ }
+
+ ret = devm_add_action_or_reset(dev, steamdeck_remove_notify_handler,
+ sd);
+ return ret;
+}
+
+static const struct platform_device_id steamdeck_extcon_id_table[] = {
+ { .name = "steamdeck-extcon" },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, steamdeck_extcon_id_table);
+
+static struct platform_driver steamdeck_extcon_driver = {
+ .probe = steamdeck_extcon_probe,
+ .driver = {
+ .name = "steamdeck-extcon",
+ },
+ .id_table = steamdeck_extcon_id_table,
+};
+module_platform_driver(steamdeck_extcon_driver);
+
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("Steam Deck extcon driver");
+MODULE_LICENSE("GPL");